Surf Gear

NC carries a great selection of surf gear, everything you need to get you in the water and keep you in the water. In addition to Surfboards we also stock ding repair kits, racks, board bags, sunscreen, fins, wax, wetsuits as well as much more!
surfboards wetsuits traction

Andy Irons

We keep a great stock of surf gear for local waters as well as tropical water. I go regularly on warm water surf trips so I always keep a supply of tropical wax. suncure. ding repair, as well as a variety of O’neill rashguards in stock. Therefore wether you are going to your favorite local spot are taking a surf trip we got your back.


​Using SunCure™ Fiberfill resin:

Make sure you know what resin your board is made with. There are 2 types Polyester or Epoxy. We make both types of repair kits.

  1. Remove all moisture, loose particles and dirt from the repair area.
  2. Rough sand the surrounding area to allow resin a secure bond.
  3. In the shade, apply the needed amount of Sun Cure™ to the repair with an application stick. Make sure to work out any air bubbles and form the resin to the repair.
  4. For flat surface or rail dings apply the clear plastic cover sheet over the resin to mold the surface and create a no-sand finish. (Note: Make sure to tape each side of the cover sheet to hold in place.)
  5. Expose the repair to sunlight (If you can see a shadow, Sun Cure™ will work).
    • Bright Sun: Gel 15 seconds – Full cure 4 to 6 minutes
    • Partial Sun: Gel 25 seconds – Full cure 6 to 8 minutes
    • Light Overcast: Gel 45 seconds – Full cure 12 to 20 minutes
      • (Note: when using Sun Cure™ in intense summer sun, thick repairs may need to be taken in and out of the sun every minute to avoid excessive heat build-up to avoid cracking.)
  6. Make sure resin has completely hardened before removing the plastic coversheet or sanding. Sun Cure™ has a tack-free surface that will allow an easy sand finish.

No Comment.

Add Your Comment